View STPLED625_8824223.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is preliminary information on a new product now in development or undergoing evaluation. details are subject to change without notice. march 2013 docid024425 rev 1 1/15 15 stfiled625, STPLED625 n-channel 620 v, 1.28 typ., 5.0 a power mosfet in i 2 pakfp and to-220 packages datasheet ? preliminary data figure 1. internal schematic diagram features ? 100% avalanche tested ? extremely high dv/dt capability ? gate charge minimized ? very low intrinsic capacitance ? improved diode reverse recovery characteristics ? zener-protected applications ? led lighting applications description these power mosfets boast extremely low on- resistance and very good dv/dt capability, rendering them suitable for buck-boost and flyback topologies. d(2,tab) g(1) s(3) am01476v1 1 2 3 ta b to-220 i2pakfp 1 2 3 order codes v ds r ds(on) max i d p tot stfiled625 620 v 1.6 5.0 a 25 w STPLED625 70 w table 1. device summary order codes marking package packaging stfiled625 led625 i 2 pakfp (to-281) tube STPLED625 to-220 www.st.com obsolete product(s) - obsolete product(s)
contents stfiled625, STPLED625 2/15 docid024425 rev 1 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 obsolete product(s) - obsolete product(s)
docid024425 rev 1 3/15 stfiled625, STPLED625 electrical ratings 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit i 2 pakfp to-220 v ds drain- source voltage 620 v v gs gate- source voltage 30 v i d drain current (continuous) at t c = 25 c 5.0 (1) 1. limited only by maximum temperature allowed 5.0 a i d drain current (continuous) at t c = 100 c 3.5 (1) 3.5 a i dm (2) 2. pulse width limited by safe operating area drain current (pulsed) 20.0 (1) 20.0 a p tot total dissipation at t c = 25 c 70 25 w i ar avalanche current, repetitive or not- repetitive (pulse width limited by t j max) 4.2 a e as single pulse avalanche energy (starting t j = 25 c, i d = i ar , v dd = 50 v) 120 mj dv/dt (3) 3. i sd i d , peak v ds v (br)dss , v dd = 80% v (br)dss peak diode recovery voltage slope 12 v/ns di/dt (3) diode reverse recovery current slope 400 a/s v iso insulation withstand voltage (ac) 2500 v t j t stg operating junction temperature storage temperature - 55 to 150 c table 3. thermal data symbol parameter value unit i2pakfp to-220 r thj-case thermal resistance junction-case max 5 1.79 c/w r thj-amb thermal resistance junction-amb max 62.50 c/w obsolete product(s) - obsolete product(s)
electrical characteristics stfiled625, STPLED625 4/15 docid024425 rev 1 2 electrical characteristics (tcase =25 c unless otherwise specified) table 4. on /off states symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 1 ma, v gs = 0 620 v i dss zero gate voltage drain current (v gs = 0) v ds = 620 v v ds = 620 v, t c =125 c 1 50 a a i gss gate-body leakage current (v ds = 0) v gs = 20 v; v ds =0 10 a v gs(th) gate threshold voltage v ds = v gs , i d = 50 a 3 3.6 4.5 v r ds(on) static drain-source on resistance v gs = 10 v, i d = 2.1 a 1.28 1.6 table 5. dynamic symbol parameter test conditions min. typ. max. unit c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v ds = 50 v, f = 1 mhz, v gs = 0 - 690 52 8.5 - pf pf pf c oss eq (1) 1. c oss eq . is defined as a constant equivalent capacitance giving the same charging time as c oss when v d s increases from 0 to 80% v dss equivalent output capacitance v gs = 0, v ds = 0 to 496 v 16.6 pf r g gate input resistance f=1 mhz open drain - 4 - q g q gs q gd total gate charge gate-source charge gate-drain charge v dd = 496 v, i d = 4.2 a, v gs = 10 v (see figure 18) - 27 4 16 - nc nc nc table 6. switching times symbol parameter test conditions min. typ. max unit t d(on) t r t d(off) t f turn-on delay time rise time turn-off-delay time fall time v dd = 310 v, i d = 4.2 a, r g = 4.7 , v gs = 10 v (see figure 17) - 12 8 40 21 - ns ns ns ns obsolete product(s) - obsolete product(s)
docid024425 rev 1 5/15 stfiled625, STPLED625 electrical characteristics the built-in back-to-back zener diodes have been specifically designed to enhance not only the device?s esd capability, but also to make them capable of safely absorbing any voltage transients that may occasionally be applied from gate to source. in this respect, the zener voltage is appropriate to achieve efficient and cost-effective protection of device integrity. the integrated zener diodes thus eliminate the need for external components. table 7. source drain diode symbol parameter test conditions min. typ. max unit i sd i sdm (1) 1. pulse width limited by safe operating area source-drain current source-drain current (pulsed) - 4.2 16.8 a a v sd (2) 2. pulsed: pulse duration = 300 s, duty cycle 1.5% forward on voltage i sd = 4.2 a, v gs = 0 - 1.5 v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd = 4.2 a, di/dt = 100 a/s v dd = 60 v (see figure 19) - 290 1900 13 ns nc a t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd = 4.2 a, di/dt = 100 a/s v dd = 60 v t j = 150 c (see figure 19) - 320 2200 14 ns nc a table 8. gate-source zener diode symbol parameter test conditions min. typ. max. unit v (br)gso gate-source breakdown voltage i gs = 1 ma, i d =0 30 - - v obsolete product(s) - obsolete product(s)
electrical characteristics stfiled625, STPLED625 6/15 docid024425 rev 1 2.1 electrical characteristics (curves) figure 2. safe operating area for i 2 pakfp figure 3. thermal impedance for i 2 pakfp i d 10 1 0.1 0.1 1 100 v ds (v) 10 (a) operation in this area is limited by max r ds(on) 10s 100s 1ms 10ms tj=150c tc=25c single pulse 0.01 am08241v1 figure 4. safe operating area for to-220 figure 5. thermal impedance to-220 figure 6. output characteristics figure 7. transfer characteristics i d 10 1 0.1 0.1 1 100 v ds (v) 10 (a) operation in this area is limited by max r ds(on) 10s 100s 1ms 10ms tj=150c tc=25c single pulse 0.01 am08239v1 i d 6 4 2 0 0 10 v ds (v) 20 (a) 5 15 25 8 10 5v 6v 7v v gs =10v am08243v1 i d 3 2 1 0 0 4 v gs (v) 8 (a) 2 6 4 5 6 7 v ds =15v am08244v1 obsolete product(s) - obsolete product(s)
docid024425 rev 1 7/15 stfiled625, STPLED625 electrical characteristics figure 8. gate charge vs gate-source voltage figure 9. static drain-source on-resistance figure 10. capacitance variations figure 11. output capacitance stored energy figure 12. normalized gate threshold voltage vs temperature figure 13. normalized on-resistance vs temperature v gs 6 4 2 0 0 5 q g (nc) (v) 20 8 10 15 10 v dd =496v i d =4.2a 25 12 300 200 100 0 400 500 v ds v gs 30 am08245v1 r ds(on) 1.28 1.26 1.24 1.22 2.0 i d (a) ( ) 1.0 3.0 1.30 1.32 1.34 1.36 v gs =10v 4.0 1.38 am08246v1 c 1000 100 10 1 0.1 10 v ds (v) (pf) 1 100 ciss coss crss am08247v1 e oss 1 0 0 100 v ds (v) (j) 400 2 200 300 3 500 4 am08248v1 v gs(th) 1.00 0.90 0.80 0.70 -75 t j (c) (norm) -25 1.10 75 25 125 am08249v1 r ds(on) 2.0 1.5 1.0 0.5 -75 t j (c) (norm) -25 75 25 125 2.5 0 am08250v1 obsolete product(s) - obsolete product(s)
electrical characteristics stfiled625, STPLED625 8/15 docid024425 rev 1 figure 14. source-drain diode forward characteristics figure 15. normalized b vdss vs temperature figure 16. maximum avalanche energy vs starting t j v sd 0 0.4 i sd (a) (v) 0.2 1.0 0.6 0.8 0.4 0.5 0.6 0.7 0.8 0.9 1.0 t j =25c t j =150c t j =-50c 1.2 1.4 1.6 1.8 am08597v1 bv dss -75 t j (c) (norm) -25 75 25 125 0.90 0.95 1.00 1.05 1.10 am08596v1 e as 0 40 t j (c) (mj) 20 100 60 80 0 10 20 30 40 120 140 50 60 70 80 90 100 110 i d =4.2 a v dd =50 v 120 130 am08598v1 obsolete product(s) - obsolete product(s)
docid024425 rev 1 9/15 stfiled625, STPLED625 test circuits 3 test circuits figure 17. switching times test circuit for resistive load figure 18. gate charge test circuit figure 19. test circuit for inductive load switching and diode recovery times figure 20. unclamped inductive load test circuit figure 21. unclamped inductive waveform figure 22. switching time waveform am01468v1 v gs p w v d r g r l d.u.t. 2200 f 3.3 f v dd am01469v1 v dd 47k 1k 47k 2.7k 1k 12v v i =20v=v gmax 2200 f p w i g =const 100 100nf d.u.t. v g am01470v1 a d d.u.t. s b g 25 a a b b r g g fast diode d s l=100 h f 3.3 1000 f v dd am01471v1 v i p w v d i d d.u.t. l 2200 f 3.3 f v dd am01472v1 v (br)dss v dd v dd v d i dm i d am01473v1 v ds t on td on td off t off t f t r 90% 10% 10% 0 0 90% 90% 10% v gs obsolete product(s) - obsolete product(s)
package mechanical data stfiled625, STPLED625 10/15 docid024425 rev 1 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. obsolete product(s) - obsolete product(s)
docid024425 rev 1 11/15 stfiled625, STPLED625 package mechanical data figure 23. i 2 pakfp (to-281) drawing table 9. i 2 pakfp (to-281) mechanical data dim. mm min. typ. max. a4.40 - 4.60 b2.50 2.70 d2.50 2.75 d1 0.65 0.85 e0.45 0.70 f0.75 1.00 f1 1.20 g4.95 5.20 h 10.00 10.40 l1 21.00 23.00 l2 13.20 14.10 l3 10.55 10.85 l4 2.70 3.20 l5 0.85 1.25 l6 7.30 7.50 uhy$ obsolete product(s) - obsolete product(s)
package mechanical data stfiled625, STPLED625 12/15 docid024425 rev 1 table 10. to-220 type a mechanical data dim. mm min. typ. max. a4.40 4.60 b0.61 0.88 b1 1.14 1.70 c0.48 0.70 d 15.25 15.75 d1 1.27 e 10 10.40 e2.40 2.70 e1 4.95 5.15 f1.23 1.32 h1 6.20 6.60 j1 2.40 2.72 l13 14 l1 3.50 3.93 l20 16.40 l30 28.90 ? p3.75 3.85 q2.65 2.95 obsolete product(s) - obsolete product(s)
docid024425 rev 1 13/15 stfiled625, STPLED625 package mechanical data figure 24. to-220 type a drawing 0015988_typea_rev_s obsolete product(s) - obsolete product(s)
revision history stfiled625, STPLED625 14/15 docid024425 rev 1 5 revision history table 11. document revision history date revision changes 25-mar-2013 1 first release. obsolete product(s) - obsolete product(s)
docid024425 rev 1 15/15 stfiled625, STPLED625 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not authorized for use in weapons. nor are st products designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com obsolete product(s) - obsolete product(s)

▲Up To Search▲

Price & Availability of STPLED625

	To Download STPLED625 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .